Sheet bend

Sheet bend step by step how to tie instructions
 
Sheet bend step by step how to tie instructions
Sheet bend step by step how to tie instructions
1. Form a loop in the end of one rope.
Sheet bend step by step how to tie instructions
Sheet bend step by step how to tie instructions
2. Pass the free end of the rope to be joined above the opening of the loop and around both parts of the first rope.
Sheet bend step by step how to tie instructions
Sheet bend step by step how to tie instructions
3. Pass the free end back under itself.
Sheet bend step by step how to tie instructions
Sheet bend step by step how to tie instructions
4. Pull all four ends to tighten.
Sheet bend step by step how to tie instructions

Description

The sheet bend is a knot that joins two ropes together. Ropes can be of different diameter.

Use

The Sheet Bend is recommended for joining two ropes of unequal size. The thicker rope must be used
for the simple bight. It works equally well if the ropes are of the same size.

Releasing

Non-jamming

Security

For maximum strength and in order to be most secure, the two free ends should end up on the same side of the knot.

Other names

Sheet Bend, becket bend, weaver’s knot, weaver’s hitch.

Tying

1. Form a loop in the end of one rope.
2. Pass the free end of the rope to be joined under the opening of the loop,
around both parts of the first rope and back under itself.
3. Pull all four ends to tighten.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.